-4%
Winnerwell FULL BOX (6 pce) Flashing Kit - 910311
SKU: 1910311Winnerwell FULL BOX (6 pce) Flashing Kit - 910311
Perfect fit with both the Small/medium and large double wall Pipe and the triple tube small and triple tube medium. The Winnerwell Flashing Kit is made from high temperature resistant silicone and is held in place by stainless steel washers with six wing nuts. This Flashing Kit can be used to create a weatherproof seal on existing stove connections or when installing a stove jack in a tent or shelter.
* Please note that the flashing kit can only be used with the double wall Pipe 2.1-2.5 (S/M) or 3.5 -inch and triple pipe 2.1-2.5 (S/M). If you use the flashing kit without the double wall pipe, the silicone will get too hot and you run the risk of fire!
The Flashing Kit must be installed in the position below the 5th row of the holes of the Heat Protector Chimney (if you have a triple tube, cut a double tube then the flashing kit must be mounted below the holes of the exhaust holes). If the flashing kit and tube are mounted at an angle, make sure that the flashing kit is placed in its entirety under the 5th row of these holes. We recommend purchasing Winnerwell® Short Pipes separately for height adjustment to meet the position requirement specified above.
WARNING: The temperature at the top part of the Heat Protector Chimney is high, the silicone part must avoid the position of the top cooling holes.
Features / Specifications
- Perfect fit with both the Small/medium and large double wall Pipe
- Made with silicone to withstand high temperatures, creates a tight seal around the tube and provides flexibility
- Inner Diameter: 4.7 inches (12 cm)
- Outer Diameter: 8.7" inches (22 cm)
- Stainless steel washers and 6 wing nuts hold the Flashing Kit in place
- To be used with existing stove connections or when installing a stove connection in a tent or shelter
- 1 Box contains 6 pieces
Specification | Description |
---|---|
Weight | 3,6 Kg |
Barcode | 0714757084830 |
EANCODE | 714757084830 |